Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › SEAT POSITION SENSOR

SEAT POSITION SENSOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).



2. CHECK SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).

  1. Even if the airbag was not deployed, check whether there is any damage to the seat position sensor. If there are any defects such as those mentioned below, replace the seat position sensor with a new one:

    1. Cracks, dents or chips on the sensor housing.
    2. Cracks or other damage to the connector.

    CAUTION:
    Follow the correct removal and installation procedures.