Home › Vehicle Interior › LIGHTING (INT) › FRONT DOOR COURTESY SWITCH

FRONT DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT COURTESY LIGHT SWITCH



E142632E04

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - Switch body
    ON (Not pushed)
    Below 1 Ω
    1 - Switch body
    OFF (Pushed)
    10 kΩ or higher

    If the result is not as specified, replace the courtesy light switch.