BACK DOOR COURTESY SWITCH > INSPECTION |
| 1. INSPECT BACK DOOR LOCK ASSEMBLY (w/o Power Back Door) |
![]() |
Check the resistance of the back door courtesy switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 3 - 4 | Unlock | Below 1 Ω |
| 3 - 4 | Lock | 10 kΩ or higher |
| 2. INSPECT BACK DOOR LOCK ASSEMBLY (w/ Power Back Door) |
![]() |
Check the resistance of the back door courtesy switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 3 - 6 | Unlock | Below 1 Ω |
| 3 - 6 | Lock | 10 kΩ or higher |