POWER STEERING SYSTEM > TERMINALS OF ECU |
| CHECK POWER STEERING ECU ASSEMBLY |

| *a | Component without harness connected (Power Steering ECU Assembly) | - | - |
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| H112-1 (CANH) - H112-2 (CANL) | GR - W | CAN communication | Ignition switch off | 54 to 69 Ω |
| H112-3 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| H112-5 (IG) - H112-3 (GND) | GR - W-B | IG power supply | Ignition switch ON | 11 to 14 V |
| H112-7 (SOF+) - H112-8 (SOF-) | LG - BE | Power steering solenoid valve signal |
| Pulse generation |