Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1201/51    Engine Control System Malfunction

for Preparation Click here


DESCRIPTION

If a malfunction in the engine control system is detected through the CAN, the operations of TRC are prohibited by the fail-safe function.

DTC Code
DTC Detection Condition
Trouble Area
C1201/51
Engine control system malfunction signal continues for 1.2 seconds.
SFI system

INSPECTION PROCEDURE

NOTICE:
When replacing the VSC actuator assembly, perform zero point calibration (Click here).

1.CHECK DTC (FOR SFI SYSTEM)
  1. Clear the DTC (SFI system) (Click here).

  1. Check the DTC (SFI system) (Click here).
    Result 
    Result
    Proceed to
    DTC (SFI system) is not output
    A
    DTC (SFI system) is output
    B



B
GO TO SFI SYSTEM (Click here)
A

CHECK FOR INTERMITTENT PROBLEMS (SYMPTOM SIMULATION) (Click here)