Home › Suspension › SUSPENSION CONTROL › HEIGHT CONTROL COMPRESSOR

HEIGHT CONTROL COMPRESSOR > REMOVAL

for Preparation Click here



1. REMOVE REAR BUMPER COVER
(Click here)


2. REMOVE HEIGHT CONTROL NO. 1 COMPRESSOR
  1. Remove the 3 clips and compressor cover.

  1. Disconnect the hose.

  1. Disconnect the 2 wire harness connectors.

  1. Disconnect the height control tube (Click here).



    C180602
  1. Remove the 3 bolts and height control compressor.



3. REMOVE HEIGHT CONTROL FILTER
  1. Disconnect the 2 hoses.



    C180590
  1. Remove the 2 bolts and height control filter.



4. REMOVE HEIGHT CONTROL COMPRESSOR BRACKET


    C180591
  1. Disconnect the 3 wire harness clamps.



    C180594
  1. Remove the 3 bolts and bracket from the height control compressor.