Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM

WIRELESS DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  2. Be sure to record the current settings before customization.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).


CUSTOMIZE
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Customize Setting / Wireless Door Lock.

  5. Select the setting by referring to the table below.


Wireless Door Lock 
Display (Item)
Default
Content
Setting
Wireless Control
ON
ON/OFF of wireless door lock function.
ON/OFF
Hazard Answer Back
ON
When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice.
ON/OFF
Wireless Buzzer Resp
ON
Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch pressed.
ON/OFF
Open Door Warning
ON
If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds.
ON/OFF
Panic Function
ON
This function operates the theft deterrent system when PANIC is pressed and held for 0.8 second or more.
ON/OFF
Auto Lock Time
30s
This function controls amount of time from unlocking doors to automatic re-locking function.
30s/60s/120s