DTC C1360/61 Malfunction in Comparative Master Cylinder Pressure Sensor |
DTC C1281/81 Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC) |
| DTC Code | DTC Detection Condition | Trouble Area |
| C1360/61 | When any of the following conditions are detected:
|
|
| C1281/81 | Detected only during test mode. |
|
| 1.CHECK BRAKE PEDAL |
Check if the brake pedal is spongy.
|
| ||||
| OK | |
| 2.PERFORM TEST MODE PROCEDURE (MASTER CYLINDER PRESSURE SENSOR) |
Perform the test mode procedure (Click here).
Check if the test mode procedure (master cylinder pressure sensor) is finished successfully.
| Result | Proceed to |
| The test mode procedure (master cylinder pressure sensor) is not finished successfully | A |
| The test mode procedure (master cylinder pressure sensor) is finished successfully | B |
|
| ||||
| A | |
| 3.INSPECT BRAKE BOOSTER ASSEMBLY |
Inspect the brake booster (Click here).
|
| ||||
| OK | |
| 4.RECONFIRM DTC |
Clear the DTC (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON, and check if the same DTC is stored in the memory (Click here).
| Result | Proceed to |
| DTC is output | A |
| DTC is not output | B |
|
| ||||
| A | ||
| ||