Home › Drivetrain ยท JF3A TRANSFER / 4WD / AWD › TRANSFER ASSEMBLY

TRANSFER ASSEMBLY > REMOVAL

for Preparation Click here



1. DRAIN TRANSFER OIL


    C159809
  1. Remove the 4 bolts and lower transfer case protector.

  1. Remove the filler plug and gasket.

  1. Remove the drain plug and gasket, and drain the transfer oil.



2. REMOVE AUTOMATIC TRANSMISSION
(Click here)


3. REMOVE TRANSFER ASSEMBLY


    C160352
  1. Remove the 8 bolts.

  1. Pull the transfer assembly straight up and remove it from the automatic transmission.

    NOTICE:
    Take care not to damage the rear adaptor oil seal with the transfer input gear spline.