Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM

ENGINE IMMOBILISER SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK FOR IMMOBILISER DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Immobiliser / DTC.

  5. Check DTCs.

    HINT:
    1. When using intelligent tester with the ignition switch off to troubleshoot: Connect the intelligent tester to the vehicle, and turn the front door courtesy light switch LH on and off at 1.5 second intervals until communication between the intelligent tester and vehicle begins.
    2. Refer to the intelligent tester operator's manual for further details.


CHECK FOR ECM DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Engine and ECT / DTC.

  5. Check DTCs.


CLEAR FOR IMMOBILISER DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Immobiliser / DTC.

  5. Clear the DTCs.

    HINT:
    1. When using intelligent tester with the ignition switch off to troubleshoot: Connect the intelligent tester to the vehicle, and turn the front door courtesy light switch LH on and off at 1.5 second intervals until communication between the intelligent tester and vehicle begins.
    2. Refer to the intelligent tester operator's manual for further details.


CLEAR FOR ECM DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Engine and ECT / DTC.

  5. Clear the DTCs.