Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER

FRONT SHOCK ABSORBER > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. REMOVE ABSORBER CONTROL ACTUATOR (w/ AVS)


C206455
  1. Disconnect the absorber control actuator connector.



    C180592
  1. Using a hexagon wrench, remove the 2 bolts and absorber control actuator.



3. REMOVE SUSPENSION CONTROL BRACKET (w/ AVS)


C181282
  1. Remove the nut and suspension control bracket.



4. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING LH


C155964
  1. Remove the nut from the shock absorber lower side.

    NOTICE:
    To prevent the shock absorber with coil spring from falling, leave the bolt inserted.



    C155965
  1. Remove the 4 nuts.

  1. Remove the bolt (lower side) and shock absorber with coil spring.