Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR

FRONT STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


C155989
  1. Remove the bolt, nut and stabilizer link.

    HINT:
    If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.



3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Use the same procedure for both sides.



4. REMOVE FRONT STABILIZER BRACKET


C155988
  1. Remove the 4 bolts and 2 brackets.



5. REMOVE FRONT STABILIZER BAR
  1. Remove the front stabilizer bar from the vehicle.

  1. Remove the 2 brackets and cushions from the stabilizer bar.



6. REMOVE FRONT NO. 1 STABILIZER BAR BUSH
  1. Remove the 2 bushes from the front stabilizer bar.