Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

DTC    U0073    Control Module Communication Bus Off

for Preparation Click here


DESCRIPTION

The power steering ECU receives signals from the ECM, steering angle sensor and skid control ECU via the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0073
Control module communication bus off.
CAN communication system

INSPECTION PROCEDURE

1.CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
  1. Clear the DTC (Click here).

  1. Check for DTC (Click here).
    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)