Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

DTC    C1547    Vehicle Speed Sensor

for Preparation Click here


DESCRIPTION

The power steering ECU receives vehicle speed signals from the skid control ECU via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the vehicle speed signal.

DTC No.
DTC Detection Condition
Trouble Area
C1547
An abnormal vehicle speed signal is received.
  1. Speed sensor circuit
  2. Brake control system
  3. CAN communication system
  4. Power steering ECU assembly

INSPECTION PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
  1. Check if DTC U0073 is output (Click here).
    Result 
    Result
    Proceed to
    DTC U0073 is not output
    A
    DTC U0073 is output
    B

    HINT:
    DTC U0073 indicates a CAN communication malfunction in the power steering system.



B
REPAIR CIRCUIT INDICATED BY OUTPUT CODE (Click here)
A


2.CHECK OTHER DTC OUTPUT (BRAKE CONTROL SYSTEM)
  1. Using the intelligent tester, check for DTCs and confirm that there are no problems in the brake control system (Click here).
    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
GO TO VEHICLE STABILITY CONTROL SYSTEM (Click here)
A

REPLACE POWER STEERING ECU ASSEMBLY (Click here)