Home › Suspension › FRONT SUSPENSION › FRONT UPPER SUSPENSION ARM

FRONT UPPER SUSPENSION ARM > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT SUSPENSION UPPER ARM BUSH


C155990
  1. Using a hammer and chisel, strike and bend the entire flange of the upper arm bush as shown in the illustration.



    C155991E01
  1. Using SST and a press, press out the bush.

    SST
    09613-26010  
    09710-22021   (09710-01031)
    09950-00020  



2. REMOVE FRONT UPPER BALL JOINT DUST COVER LH


C158521
  1. Using a snap ring expander, remove the dust cover set ring and dust cover.