Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY

FRONT PROPELLER SHAFT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FRONT PROPELLER SHAFT


    C179230E03
  1. Align the matchmarks on the differential and propeller shaft flange.

  1. Align the matchmarks on the transfer and propeller shaft flange.

  1. Install the front propeller shaft assembly with the 8 nuts and 8 washers.

    Torque:
    80 N*m{ 819 kgf*cm , 59 ft.*lbf }



2. INSTALL PROPELLER SHAFT HEAT INSULATOR


C158452
  1. Install the heat insulator to the heat insulator bracket with the 2 bolts.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }