Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY

FRONT PROPELLER SHAFT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER SHAFT HEAT INSULATOR


    C158452
  1. Remove the 2 bolts and heat insulator from the heat insulator bracket.



2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY


    C179230E03
  1. Place matchmarks on the differential and propeller shaft flange.

  1. Place matchmarks on the transfer and propeller shaft flanges.

  1. Remove the 8 nuts and 8 washers and remove the front propeller shaft assembly.