Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > REMOVAL

for Preparation Click here



1. REMOVE V-BANK COVER SUB-ASSEMBLY


A165576E03
  1. Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.



2. REMOVE AIR CLEANER HOSE ASSEMBLY


A187008
  1. Disconnect the vacuum hose and ventilation hose.

  1. Loosen the 2 clamps.

  1. Remove the air cleaner hose.



3. REMOVE IGNITION COIL ASSEMBLY


    A151832
  1. Disconnect the 8 ignition coil connectors.

  1. Remove the 8 bolts and 8 ignition coils.



4. REMOVE SPARK PLUG
  1. Using a 16 mm plug wrench, remove the 8 spark plugs.