3UR-FE INTAKE / EXHAUST > TORQUE SPECIFICATIONS |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
| Hose clamp x Air cleaner hose | 4.0 | 41 | 35 in.*lbf | |
| Purge VSV x Intake manifold | 21 | 214 | 16 | |
| Throttle W/motor body x Intake manifold | 10 | 102 | 7 | |
| Intake manifold x cylinder head | 21 | 214 | 16 | |
| Vacuum switching valve (for ACIS) x Intake manifold | 9.0 | 92 | 80 in.*lbf | |
| Ventilation hose x Intake manifold | Bolt A | 21 | 214 | 16 |
| Bolt B | 10 | 102 | 7 | |
| No. 1 tube x Intake manifold | 8.2 | 84 | 73 in.*lbf | |
| No. 1 v-bank cover bracket x Intake manifold | 10 | 102 | 7 | |
| V-bank cover bolt x Intake manifold | 10 | 102 | 7 | |
| Wire harness clamp bracket x Intake manifold | 8.0 | 82 | 71 in.*lbf | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
| Exhaust manifold LH and RH x Cylinder head (w/ Secondary Air Injection System) | for nut A | 10 | 102 | 7 |
| except nut A | 21 | 214 | 16 | |
| Exhaust manifold LH and RH x Cylinder head (w/o Secondary Air Injection System) | 21 | 214 | 16 | |
| No. 1 heat insulator x Exhaust manifold RH | 10 | 102 | 7 | |
| No. 2 heat insulator x Exhaust manifold LH | 10 | 102 | 7 | |
| Control valve shaft x No. 2 intermediate shaft assembly | 35 | 357 | 26 | |
| No. 2 intermediate shaft assembly x Sliding yoke | 35 | 357 | 26 | |
| Front No. 3 floor heat insulator x body | 5.5 | 56 | 49 in.*lbf | |
| Front No. 4 floor heat insulator x body | 5.5 | 56 | 49 in.*lbf | |
| Front exhaust pipe assembly x Exhaust manifold | 54 | 554 | 40 | |
| Front No. 2 exhaust pipe assembly x Exhaust manifold | 54 | 554 | 40 | |
| Front exhaust pipe assembly x Center exhaust pipe assembly | 48 | 489 | 35 | |
| Front No. 2 exhaust pipe assembly x Front No. 3 exhaust pipe assembly | 48 | 489 | 35 | |
| Front No. 3 exhaust pipe assembly x Center exhaust pipe assembly | 48 | 489 | 35 | |
| Transfer air guide x frame | for 4WD | 16 | 163 | 12 |
| Center engine under cover x frame | for 4WD | 29 | 296 | 21 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
| Front exhaust pipe x Exhaust manifold RH | 54 | 554 | 40 |
| Front No. 2 exhaust pipe x Exhaust manifold LH | 54 | 554 | 40 |
| Front No. 3 exhaust pipe sub-assembly x Front No. 2 exhaust pipe sub-assembly | 48 | 489 | 35 |
| Center exhaust pipe x Front exhaust pipe and Front No. 3 exhaust pipe sub-assembly | 48 | 489 | 35 |
| Clamp | 32 | 326 | 24 |
| Monolithic converter protector x Monolithic converter | 11 | 107 | 8 |
| No. 1 monolithic converter protector x No. 1 Monolithic converter | 11 | 107 | 8 |