Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE

WASHER NOZZLE > ADJUSTMENT

for Preparation Click here



1. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    E146295
  1. Using a screwdriver, detach the 2 claws and separate the washer nozzle.

    NOTICE:
    Be careful not to damage the windshield.



    E146296
  1. Remove the washer nozzle from the washer hose.

    NOTICE:
    Washer nozzles cannot be reused.



  1. Select a washer nozzle so that the spray is within the standard contact areas. Replace the washer nozzle with the selected one.


    E146297E03