DTC B279C Theft Deterrent System Presence Detection |
| DTC No. | DTC Detection Condition | Trouble Area | DTC Output Confirmation Operation |
| B279C | An ECM that is incompatible with immobiliser system is installed. | ECM | Check for DTCs. |
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
| Engine cannot be started | - |
| DTC No. | Data List and Active Test |
| B279C | - |
| 1.CLEAR DTC |
Clear the DTCs (Click here).
| NEXT | |
| 2.CHECK FOR DTC |
Start the engine.
Check for DTCs (Click here).
|
| ||||
| OK | ||
| ||
| 3.REPLACE CURRENT ECM WITH PROPER ECM |
Replace the current ECM with the proper ECM (Click here).
| NEXT | ||
| ||