ROOM TEMPERATURE SENSOR (for Front Side) > INSTALLATION |
| 1. INSTALL ROOM TEMPERATURE SENSOR (COOLER THERMISTOR) |
![]() |
Connect the connector, hose and install the room temperature sensor.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Attach the 2 claws to install the sensor.
![]() |
Connect the connectors.
Attach the 9 clips and claw to install the finish panel.
Install the 2 <A> bolts.
| 3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.
Attach the 3 claws to install the hood lock lever
| 4. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 7 claws to install the side panel.
| 5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
| 6. INSTALL COWL SIDE TRIM BOARD LH |
| 7. INSTALL FRONT DOOR SCUFF PLATE LH |