Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL

AIR CONDITIONING PANEL > INSTALLATION

for Preparation Click here



1. INSTALL SEAT HEATER SWITCH LH (w/o Climate Control Seat System)


B194047
  1. Attach the 4 claws to install the 2 seat heater switches.



2. INSTALL SEAT HEATER SWITCH RH (w/o Climate Control Seat System)


B194047
  1. Attach the 4 claws to install the 2 seat heater switches.



3. INSTALL SEAT HEATER SWITCH LH (w/ Climate Control Seat System)


B194048
  1. Attach the 8 claws to install the 2 seat heater switches.



4. INSTALL SEAT HEATER SWITCH RH (w/ Climate Control Seat System)


B194048
  1. Attach the 8 claws to install the 2 seat heater switches.



5. INSTALL STEREO JACK ADAPTER ASSEMBLY


    E161053
  1. Connect the connector.



    E161052
  1. Attach the 2 claws to install the adapter.



6. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    I104352
  1. Connect the connectors.

  1. Attach the 4 clips and install the panel.



7. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B223270
  1. Connect the connectors.

  1. Attach the 4 clips and 2 claws to install the finish panel.



8. INSTALL COMBINATION METER ASSEMBLY


    E141678
  1. Connect the connector and engage the clip and install the combination meter assembly.



    E161309
  1. Install the 4 screws.



9. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B219715
  1. Attach the 12 clips to install the finish panel.

  1. Connect the 2 connectors and clamp.



    B192334
  1. Attach the 4 claws to install the instrument panel finish panel retainer.



10. INSTALL FRONT CONSOLE BOX


B222975
  1. Install the front console box with the 5 screws and 2 clips.

  1. Attach the 2 clamps.



11. INSTALL REAR CONSOLE BOX ASSEMBLY


B192330
  1. Attach the 6 claws to install the rear console box.

  1. Install the 2 screws and 4 bolts.



    B188223
  1. Connect the connectors.



12. INSTALL CONSOLE BOX CARPET


B188222
  1. Install the console box carpet.



13. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    B222976
  1. Connect the connectors.

  1. Attach the 6 clips to install the console panel.

  1. Install the clip.



14. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    B161742
  1. Attach the 12 clips to install the console panel.



15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B167312
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.



16. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B163883
  1. Attach the 2 claws to install the sensor.



    B229064
  1. Connect the connectors.

  1. Attach the 9 clips and claw to install the finish panel.

  1. Install the 2 <A> bolts.



17. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B192511
  1. Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.

  1. Attach the 3 claws to install the hood lock lever



18. INSTALL INSTRUMENT SIDE PANEL LH


    B229058
  1. Attach the 7 claws to install the side panel.



19. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure for both sides.



20. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure for both sides.



21. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.