AIR CONDITIONING PANEL > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE LH |
| 2. REMOVE COWL SIDE TRIM BOARD LH |
| 3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
| 4. REMOVE INSTRUMENT SIDE PANEL LH |
![]() |
Using a moulding remover, detach the 7 claws and remove the side panel.
| 5. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Detach the 3 claws.
Disconnect the hood lock control cable and remove the hood lock control lever sub-assembly.
| 6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Remove the 2 <A> bolts.
Detach the 9 clips and claw.
![]() |
Detach the 2 claws and remove the sensor.
Remove the finish panel and then disconnect the connectors.
| 7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Detach the 12 clips and remove the console panel.
| 9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Detach the 12 clips and remove the console panel.
| 10. REMOVE CONSOLE BOX CARPET |
![]() |
Remove the console box carpet.
| 11. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() |
Disconnect the connectors.
![]() |
Remove the 4 bolts and 2 screws.
Detach the 6 claws and remove the rear console box.
| 12. REMOVE FRONT CONSOLE BOX |
![]() |
Detach the 2 clamps.
Remove the 2 clips.
Remove the 5 screws and the front console box.
| 13. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Detach the 4 claws and remove the instrument panel finish panel retainer.
![]() |
Disconnect the 2 connectors and wire harness clamp.
Detach the 12 clips and remove the finish panel.
| 14. REMOVE COMBINATION METER ASSEMBLY |
![]() |
Remove the 4 screws and combination meter assembly.
![]() |
Disconnect the connector and detach the wire harness clamp.
| 15. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Detach the 4 clips and 2 claws.
Disconnect the connectors and remove the finish panel.
| 16. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Detach the 4 clips and separate the panel.
Disconnect the connectors and remove the panel.
| 17. REMOVE STEREO JACK ADAPTER ASSEMBLY |
![]() |
Detach the 2 claws and remove the stereo jack adapter.
![]() |
Disconnect the connector.
| 18. REMOVE SEAT HEATER SWITCH LH (w/o Climate Control Seat System) |
![]() |
Detach the 4 claws and remove the 2 seat heater switches.
| 19. REMOVE SEAT HEATER SWITCH RH (w/o Climate Control Seat System) |
![]() |
Detach the 4 claws and remove the 2 seat heater switches.
| 20. REMOVE SEAT HEATER SWITCH LH (w/ Climate Control Seat System) |
![]() |
Detach the 8 claws and remove the 2 seat heater switches.
| 21. REMOVE SEAT HEATER SWITCH RH (w/ Climate Control Seat System) |
![]() |
Detach the 8 claws and remove the 2 seat heater switches.