Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > DIAGNOSTIC TROUBLE CODE CHART

for Preparation Click here


HINT:
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to "See page" below.


CAN Communication System 
DTC Code
Detection Item
See page
B2621
Communication Interruption
Click here
B2624
Vehicles Speed Malfunction
Click here
U0199
Lost Communication with "Door Control Module A"
Click here
U0208
Lost Communication with "Seat Control Module A"
Click here
U0230
Lost Communication with Rear Gate Module
Click here
U0232
Lost Communication with Blind Spot Monitor Slave Module
Click here
U0233
Lost Communication with Blind Spot Monitor Master Module
Click here
U1002
Lost Communication with Gateway Module
Click here
U1002 (CAN No. 2 BUS)
Lost Communication with Gateway Module (Network Gateway ECU)
Click here
U1115
Lost Communication with Tilt and Telescopic Module
Click here