FRONT AIR CONDITIONING UNIT > DISASSEMBLY |
| 1. REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY |
![]() |
Detach the 4 claws and remove the nozzle.
| 2. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY |
![]() |
Detach the 4 claws and remove the air duct.
| 3. REMOVE AIR FILTER COVER PLATE |
![]() |
Detach the 2 clips and remove the air filter cover plate.
| 4. REMOVE AIR REFINER ELEMENT |
![]() |
Remove the air refiner element.
| 5. REMOVE COOLER AIR HOSE |
![]() |
Detach the 2 claws and remove the cooler air hose.
| 6. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY |
![]() |
Remove the screw and the air duct.
| 7. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 2 screws and the amplifier.
| 8. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY |
![]() |
Remove the 3 screws and the fan motor.
| 9. REMOVE AIR DUCT |
![]() |
Remove the 2 screws and the air duct.
| 10. REMOVE DAMPER SERVO SUB-ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 3 screws and damper servo.
| 11. REMOVE DAMPER SERVO SUB-ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 3 screws and the damper servo.
| 12. REMOVE BLOWER DAMPER SERVO SUB-ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 3 screws and damper servo.
| 13. REMOVE COOLING UNIT DAMPER SERVO SUB-ASSEMBLY |
![]() |
Disconnect the 2 connectors.
Remove the 4 screws and damper servo.
| 14. REMOVE AIR CONDITIONER TUBE ASSEMBLY (w/ Cool Box) |
![]() |
Using SST, remove the 2 piping clamps.
Attach SST to the 2 piping clamps.
![]() |
Push down SST and release the clamp lock.
| *1 | Release lever |
| *2 | Push |
| *3 | Pull |
Pull SST slightly and push the release lever, then remove the 2 piping clamps with SST.
Remove the 2 piping clamps from SST.
Disconnect the air conditioner tube.
![]() |
Remove the screw and the air conditioner tube.
Remove the 6 O-rings from the air conditioner tube.
| 15. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (w/ Cool Box) |
![]() |
Remove the packing.
![]() |
Remove the 2 screws.
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and detach the air conditioner tube.
Remove the 2 O-rings.
![]() |
Detach the clamp.
Remove the 3 screws and plate.
![]() |
Detach the 3 claws and remove the heater clamp.
![]() |
Remove the 6 screws.
Detach the 3 claws and remove the air conditioning radiator.
| 16. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (w/o Cool Box) |
![]() |
Remove the packing.
![]() |
Detach the clamp.
Remove the 3 screws and plate.
![]() |
Detach the 3 claws and remove the heater clamp.
![]() |
Remove the 6 screws.
Detach the 3 claws and remove the air conditioning radiator.
| 17. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY |
![]() |
Remove the heater radiator unit.
| 18. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
![]() |
Remove the evaporator from the blower case.
| 19. REMOVE EVAPORATOR TEMPERATURE SENSOR |
![]() |
Remove the sensor.
| 20. REMOVE COOLER EXPANSION VALVE (w/o Cool Box) |
![]() |
Remove the butyl.
Using a 4 mm hexagon wrench, remove the 2 bolts.
Remove the tube and accessory and the 2 O-rings.
Remove the cooler expansion valve and 2 O-rings from the cooler evaporator.