Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


I104380
  1. Install the motor with the 3 screws.

  1. Connect the connector and 2 clamps.

  1. Attach the 2 clamps.



2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Attach the 2 guides and 4 claws.

  1. Attach the clip to install the under cover.