Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › TRANSPONDER KEY AMPLIFIER

TRANSPONDER KEY AMPLIFIER > INSTALLATION

for Preparation Click here



1. INSTALL TRANSPONDER KEY COIL


    B192528
  1. Install the transponder key coil.

  1. Connect the connector.



2. INSTALL UPPER STEERING COLUMN COVER


    C159215
  1. Attach the claw to install the upper steering column cover.

  1. Attach the 4 clips.



3. INSTALL LOWER STEERING COLUMN COVER


    C181134
  1. Attach the 2 claws to install the lower steering column cover.

  1. Install the 2 screws.



4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
  1. Attach the 2 claws to install the sensor.

  1. Connect the connectors.

  1. Attach the 9 clips and claw to install the finish panel.

  1. Install the 2 <A> bolts.



5. INSTALL INSTRUMENT SIDE PANEL LH


    B229058
  1. Attach the 7 claws to install the side panel.



6. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure for both sides.



7. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.