Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC LIGHT CONTROL SENSOR

AUTOMATIC LIGHT CONTROL SENSOR > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY (for 14 Speakers)
  1. Remove the instrument panel sub-assembly .



2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY (for 8 Speakers)
  1. Remove the instrument panel sub-assembly .



3. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    I104438
  1. Disconnect the connector.

  1. Detach the 2 claws and remove the automatic light control sensor.