Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC LIGHT CONTROL SENSOR

AUTOMATIC LIGHT CONTROL SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR


    I104439
  1. Attach the 2 claws to install the automatic light control sensor.

  1. Connect the connector.



2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for 8 Speakers)
  1. Install the instrument panel sub-assembly .



3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for 14 Speakers)
  1. Install the instrument panel sub-assembly .