Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM

LIGHTING SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



MANUAL LIGHT CONTROL SYSTEM
  1. This system functions when lights such as the headlight, taillight and front fog light are illuminated by manual operation of the light control switch.

    1. The main body ECU receives the following signals (D).

      1. Light control switch signal
      2. Headlight dimmer switch signal
      3. Front fog light switch signal

    2. The main body ECU controls the following signals based on the signals listed in D (E).

      1. Headlight relay operation signal
      2. Taillight relay operation signal
      3. Front fog light relay operation signal

    3. The main body ECU controls the on/off operation of the following parts based on the signal listed in E.

      1. Headlight (Low)
      2. Headlight (High)
      3. Front fog light


LIGHT AUTO TURN OFF SYSTEM
  1. General
    The light turn-off system is used to prevent the driver from leaving the vehicle with the headlights, fog lights, front clearance lights, taillights or license plate lights on.

  2. When all of the following conditions are met, the exterior lights turn off:

    1. The engine switch is turned from on (IG) to off.
    2. The headlights, fog lights or taillights are on.
    3. The driver side door is opened.