Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM

LIGHTING SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



DATA LIST

HINT:
Using the intelligent tester to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    D Door Courtesy SW
    Front door courtesy light switch LH signal / ON or OFF
    ON: Front door courtesy light switch LH ON
    OFF: Front door courtesy light switch LH OFF
    -
    P Door Courtesy SW
    Front door courtesy light switch RH signal / ON or OFF
    ON: Front door courtesy light switch RH ON
    OFF: Front door courtesy light switch RH OFF
    -
    Dimmer SW
    Dimmer switch signal / ON or OFF
    ON: Dimmer switch ON
    OFF: Dimmer switch OFF
    -
    Passing Light SW
    Passing light switch signal / ON or OFF
    ON: Passing light switch ON
    OFF: Passing light switch OFF
    -
    Front Fog Light SW*
    Front fog light switch signal / ON or OFF
    ON: Front fog light switch ON
    OFF: Front fog light switch OFF
    -
    Auto Light SW
    Auto light switch signal / ON or OFF
    ON: Auto light switch ON
    OFF: Auto light switch OFF
    -
    Head Light SW (Head)
    Headlight switch signal / ON or OFF
    ON: Headlight switch ON
    OFF: Headlight switch OFF
    -
    Head Light SW (Tail)
    Taillight switch signal / ON or OFF
    ON: Taillight switch ON
    OFF: Taillight switch OFF
    -
    Illumination Rate
    Illumination rate / min.: 0, max.: 99.99
    Actual illumination rate is displayed
    -
    Parking Brake SW
    Parking brake switch signal / ON or OFF
    ON: Parking brake switch ON
    OFF: Parking brake switch OFF
    -
    Sensitivity
    Turn on luminous intensity/ Dark1, Dark2, Normal, Light1, Light2
    Customize setting displayed
    -
    *: w/ Front Fog Light

    Mirror ECU 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    Foot Light
    Foot light lighting time / OFF, 7.5s, 15s, 30s
    Customize setting displayed
    -


ACTIVE TEST

HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Taillight Relay
    Taillight
    ON or OFF
    -
    Headlight Relay
    Headlight
    ON or OFF
    -
    Head Light Hi
    Headlight (High)
    ON or OFF
    -
    Front Fog Light Relay*
    Front fog light
    ON or OFF
    -
    *: w/ Front Fog Light

    Mirror ECU 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Foot Light
    Foot light (puddle light)
    ON or OFF
    -