FRONT SEAT ASSEMBLY (for Manual Seat) > INSTALLATION |
| 1. INSTALL FRONT SEAT ASSEMBLY LH |
Place the front seat assembly in the cabin.
Connect the seat wire connectors under the seat.
Lift up the seat track adjusting handle to move the seat to the rearmost position.
![]() |
Install the 2 bolts.
Lift up the seat track adjusting handle to move the seat to the foremost position.
![]() |
Install the 2 bolts.
| 2. INSTALL SEAT TRACK COVER LH |
![]() |
Attach the 2 claws to install the seat track cover.
| 3. INSTALL SEAT TRACK COVER INNER LH |
![]() |
Attach the 2 claws to install the seat track cover.
| 4. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER LH (w/ Cover) |
Lift up the seat track adjusting handle and move the seat to the rearmost position.
![]() |
Attach the 4 claws in the order shown in the illustration to install the cover.
| 5. INSTALL FRONT INNER SEAT TRACK BRACKET COVER (w/ Cover) |
![]() |
Attach the 4 claws in the order shown in the illustration to install the cover.
| 6. INSTALL FRONT SEAT HEADREST ASSEMBLY |
Install the front seat headrest assembly.
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 8. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).