Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH

SEAT MEMORY SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    B190538
  1. Detach the 3 clips and remove the front door lower frame bracket garnish.

  1. Disconnect the connector.



2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    B190539
  1. Using a moulding remover, detach the 4 claws and remove the front door inside handle bezel plug.



3. REMOVE FRONT ARMREST BASE UPPER PANEL LH


    B190537
  1. Detach the 2 clips and 5 claws and remove the front armrest base upper panel.

  1. Disconnect the connector.



4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


B190541
  1. Remove the front door armrest cover.

  1. Remove the 2 screws.



    B190542
  1. Detach the 10 clips.

  1. Disconnect the connector.



    B190543
  1. Disconnect the front door lock remote control cable and front door inside locking cable and remove the front door trim board sub-assembly.



5. REMOVE SEAT MEMORY SWITCH


    B194034
  1. Remove the 2 screws and seat memory switch.