POWER SEAT SWITCH (for Front Seat) > INSTALLATION |
| 1. INSTALL FRONT POWER SEAT SWITCH LH (w/o Memory) |
![]() |
Install the front power seat switch with the 3 screws.
Connect the connector.
| 2. INSTALL LEG SUPPORT ADJUSTMENT SWITCH (w/ Leg Support Adjustment Switch) |
![]() |
Connect the connector.
Install the leg support adjustment switch with the 2 screws.
Attach the 2 wire harness clamps.
| 3. INSTALL FRONT POWER SEAT LUMBAR SWITCH (for Power Seat) |
![]() |
Install the front power seat lumbar switch with the 2 screws.
Connect the connector.
| 4. INSTALL FRONT POWER SEAT LUMBAR SWITCH (for Manual Seat) |
![]() |
Install the front power seat lumbar switch with the 2 screws.
Connect the connector.
| 5. INSTALL FRONT SEAT CUSHION SHIELD LH (for Power Seat) |
![]() |
Connect the switch connectors.
Attach the 2 claws to install the cushion shield.
Install the 3 screws.
![]() |
Install the 2 screws.
Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with 2 new hog rings.
| 6. INSTALL FRONT SEAT CUSHION SHIELD LH (for Manual Seat) |
![]() |
Connect the connector and attach the wire harness clamp.
Attach the 3 claws in the order shown in the illustration, to install the front seat cushion shield.
Install the 3 screws.
![]() |
Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with 2 new hog rings.
| 7. INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat) |
![]() |
Attach the 2 claws to install the knob.
| 8. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat) |
![]() |
Attach the 2 claws to install the knob.
| 9. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat) |
![]() |
Attach the claw to install the reclining adjuster release handle.
| 10. INSTALL VERTICAL SEAT ADJUSTER KNOB (for Manual Seat) |
![]() |
Install the snap ring to the vertical seat adjuster knob.
Install the vertical seat adjuster knob to the front seat.
| 11. INSTALL VERTICAL ADJUSTING HANDLE LH (for Manual Seat) |
![]() |
Install the vertical adjusting handle with the 2 screws.
| 12. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat) |
![]() |
Attach the 2 claws to install the vertical adjuster handle cap.
| 13. INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat) |
Install the front seat (Click here).
| 14. INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat) |
Install the front seat (Click here).