REAR SEAT CUSHION HEATER > INSPECTION |
| 1. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY LH |
![]() |
Heat the thermostat with a light.
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Thermostat temperature 25°C (77°F) | Below 1 Ω |
| 1 - 5 | Seat cushion heater temperature 20°C (68°F) | 3.0 to 3.6 Ω |
| 3 - 4 | Seat cushion heater temperature 15°C to 30°C (59°F to 86°F) | 8.2 to 14.9 kΩ |
| 2. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY RH |
![]() |
Heat the thermostat with a light.
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Thermostat temperature 25°C (77°F) | Below 1 Ω |
| 1 - 5 | Seat cushion heater temperature 20°C (68°F) | 3.0 to 3.6 Ω |
| 3 - 4 | Seat cushion heater temperature 15°C to 30°C (59°F to 86°F) | 8.2 to 14.9 kΩ |