FRONT SEAT SIDE AIRBAG ASSEMBLY > DISPOSAL |
| 1. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE) |
![]() |
Check the function of SST .
Read the precaution (Click here).
Disconnect the cable from the negative (-) battery terminal.
![]() |
Install SST.
Disconnect the connector (yellow colored) from the front seat side airbag.
Connect SST connector to the front seat side airbag connector.
![]() |
Move SST at least 10 m (32.8 ft.) away from the vehicle front side window.
Maintaining enough clearance for SST wire harness in the front side window, close all doors and windows of the vehicle.
Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
Deploy the airbag.
Check that no one is inside the vehicle or within a 10 m (32.8 ft.) radius of the vehicle.
Press SST activation switch and deploy the airbag.