Component
| Function
|
Outer mirror control ECU
| Sends operation signals to each motor.
|
Mirror master switch
| Consists of R and L switches. One must be chosen before the mirror control switches can be operated.
|
Mirror control switch
| Mirror R and L signals are sent to the outer mirror control ECU from the outer mirror switch. After selecting the R or L switch, the RIGHT, LEFT, UP and DOWN control switches change angle of mirror.
|
Mirror retract switch
| Retracts and returns the remote control mirror. Mirror retract and return signals are sent to the outer mirror control ECU from the main body ECU.
|
Vertical mirror motor
| Receives a signal from the outer mirror control ECU and adjusts remote control mirror vertically.
|
Horizontal mirror motor
| Receives a signal from the outer mirror control ECU and adjusts the remote control mirror horizontally.
|
Retract motor
| Receives a signal from the outer mirror control ECU and retracts and returns the remote control mirror.
|
Mirror heater
| Receives a signal from the A/C amplifier and starts the mirror heater.
|
EC mirror cell
| Varies the reflection rate of the mirror through the function of the EC elements.
|
Mirror position sensor
| Detects the remote control mirror position. This data is detected by the outer mirror control ECU.
|
Outer mirror reverse gear link switch
| Sends permission signals for reverse interlock control to the outer mirror control ECU.
|
Seat memory switch (SET, 1, 2, switch)
| When the SET switch and seat memory switch 1 or seat memory switch 2 are pressed simultaneously, a signal is input to the outer mirror control ECU and front power seat switch, which record the mirror position.
|