Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT

IGNITION KEY CYLINDER LIGHT > REMOVAL

for Preparation Click here



1. REMOVE LOWER STEERING COLUMN COVER


    C181134
  1. Remove the 2 screws.

  1. Detach the 2 claws to remove the lower steering column cover.



2. REMOVE UPPER STEERING COLUMN COVER
  1. Detach the 4 clips.



    C159215
  1. Detach the claw to remove the upper steering column cover.



3. REMOVE TRANSPONDER KEY AMPLIFIER


    E161805E01
  1. Disconnect the connector.

  1. Using a screwdriver with its tip wrapped in protective tape, Detach the 2 claws.

  1. Disconnect the connector and remove the transponder key amplifier.