Home › Engine / Hybrid System › 3UR-FE FUEL › FUEL PUMP ECU

FUEL PUMP ECU > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY


    A240794
  1. Securely attach the claw of the fuel pump ECU into the hole of the underbody, and install the fuel pump ECU with the bolt.

    Torque:
    20 N*m{ 199 kgf*cm , 14 ft.*lbf }

    NOTICE:
    Do not use a fuel pump ECU that has been dropped or subjected to a strong impact.



    A240793E02
  1. Connect the connector of the fuel pump ECU.

  1. Turn the lock lever and secure the connector with the lock lever.