Home › Vehicle Interior › LIGHTING (INT) › GLOVE BOX LIGHT

GLOVE BOX LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL GLOVE BOX BULB


    E161852
  1. Install the glove box bulb.



2. INSTALL GLOVE BOX LIGHT ASSEMBLY


    E161851
  1. Connect the connector.

  1. Attach the 2 claws to install the glove box light.



3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH


    B230430
  1. Connect the connector.



    B226741
  1. Attach the 3 claws to install the finish panel.

  1. Install the 3 <D> screws and bolt <A>.



4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


B226758
  1. Attach the 2 guides and 4 claws.

  1. Attach the clip to install the under cover.



5. INSTALL INSTRUMENT SIDE PANEL RH


    B229198
  1. Attach the 6 claws to install the side panel.



6. INSTALL COWL SIDE TRIM BOARD RH


    B190152
  1. Attach the 2 clips to install the cowl side trim board.

  1. Install the clip.



7. INSTALL FRONT DOOR SCUFF PLATE RH


B190151
  1. Attach the 9 claws to install the scuff plate.