Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)

STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column) > REASSEMBLY

for Preparation Click here



1. INSTALL STEERING COLUMN BRACKET SPACER


C104853E01
  1. Fix the steering column in a vise between aluminum plates or a cloth. Then install the steering column bracket spacer to the steering column.

    NOTICE:
    1. Install the steering column bracket spacer so that it is facing in the direction shown in the illustration.
    2. When using a vise, do not overtighten it.



2. INSTALL IGNITION SWITCH ASSEMBLY


C155157
  1. Attach the 2 claws to install the ignition switch to the upper steering column with switch bracket assembly.



3. INSTALL KEY INTERLOCK SOLENOID


C155158
  1. Install the key interlock solenoid to the upper steering column with switch bracket assembly with the 2 screws.



4. INSTALL UNLOCK WARNING SWITCH ASSEMBLY


C155156
  1. Attach the 2 claws to install the unlock warning switch to the upper steering column with switch bracket assembly.



5. INSTALL IGNITION SWITCH LOCK CYLINDER
  1. Check that the ignition switch lock cylinder is in the ACC position.



    C103932E02
  1. Install the ignition switch lock cylinder to the upper steering column with switch bracket assembly.

  1. Check that the ignition switch lock cylinder assembly is securely installed.



6. INSPECT STEERING LOCK OPERATION


7. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY
  1. Temporarily install the upper steering column with switch bracket and steering lock bracket with 2 new tapered-head bolts.



    C159755
  1. Tighten the 2 tapered-head bolts until the bolt heads break off.



8. INSTALL TRANSPONDER KEY AMPLIFIER
  1. Align the transponder key amplifier with the installation position of the upper bracket with the amplifier inclined.



    C155160
  1. Push the transponder key amplifier upward and install it to the upper bracket.

    NOTICE:
    Do not push the amplifier up with excessive force.