Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 RADIO BRACKET


    B164788
  1. Install the bracket with the 3 bolts.



2. INSTALL NO. 1 RADIO BRACKET


    B164789
  1. Install the bracket with the 3 bolts.



3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    B224309
  1. Connect the connectors.

  1. Insert the radio receiver and attach the 3 clips on its backside.

    NOTICE:
    When inserting the radio receiver, do not press its knobs.



    B224307
  1. Install the radio receiver with the 4 bolts.



4. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    I104352
  1. Connect the connectors.

  1. Attach the 4 clips and install the panel.



5. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B223270
  1. Connect the connectors.

  1. Attach the 4 clips and 2 claws to install the finish panel.



6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B219715
  1. Attach the 12 clips to install the finish panel.

  1. Connect the 2 connectors and clamp.



    B192334
  1. Attach the 4 claws to install the instrument panel finish panel retainer.



7. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    B222976
  1. Connect the connectors.

  1. Attach the 6 clips to install the console panel.

  1. Install the clip.



8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    B161742
  1. Attach the 12 clips to install the console panel.



9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B167312
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.



10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B163883
  1. Attach the 2 claws to install the sensor.



    B229064
  1. Connect the connectors.

  1. Attach the 9 clips and claw to install the finish panel.

  1. Install the 2 <A> bolts.



11. INSTALL INSTRUMENT SIDE PANEL LH


    B229058
  1. Attach the 7 claws to install the side panel.



12. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure for both sides.



13. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.