Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO COMPONENT AMPLIFIER

STEREO COMPONENT AMPLIFIER > INSTALLATION

for Preparation Click here



1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY


    B190161
  1. Install the amplifier with the 3 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Connect the 4 connectors.



2. INSTALL AUDIO AMPLIFIER COVER


    B190162
  1. Set the cover on the stereo amplifier assembly.

  1. Attach the 3 clips.



3. INSTALL FRONT SEAT ASSEMBLY RH
  1. for Manual Seat:
    Install the front seat RH (Click here).

  1. for Power Seat:
    Install the front seat RH (Click here).



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here).