LUGGAGE SPEAKER > INSPECTION |
| 1. INSPECT QUARTER SIDE SPEAKER ASSEMBLY (for Standard) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Always | 4 Ω |
| 2. INSPECT QUARTER SIDE SPEAKER ASSEMBLY (for 14 Speakers) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Always | 1.6 to 2.6 Ω |
| 3. INSPECT W/BOX NO. 1 SPEAKER ASSEMBLY (for 14 Speakers) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Always | 1.6 to 2.4 Ω |