Home › Audio / Visual / Telematics › AUDIO / VIDEO › LUGGAGE SPEAKER

LUGGAGE SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT QUARTER SIDE SPEAKER ASSEMBLY (for 8 or 12 Speakers)


E159001E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    4 Ω

    If the result is not as specified, replace the speaker assembly.



2. INSPECT QUARTER SIDE SPEAKER ASSEMBLY (for 14 Speakers)


E159001E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    1.6 to 2.6 Ω

    If the result is not as specified, replace the speaker assembly.



3. INSPECT W/BOX NO. 1 SPEAKER ASSEMBLY (for 14 Speakers)


E159002E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    1.6 to 2.4 Ω

    If the result is not as specified, replace the speaker assembly.