INSTRUMENT PANEL SPEAKER > INSPECTION |
| 1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for 8 or 12 Speakers) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 3 | Always | Below 1 Ω |
| 2 - 4 | ||
| 3 - 4 | Always | 3.4 to 4.6 Ω |
| 2. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for 14 Speakers) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 3 - 4 | Always | 1.5 to 2.5 Ω |
| 3 - 1 | Always | Below 1 Ω |
| 4 - 2 |
| 3. INSPECT FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Always | 1.5 to 2.1 Ω |