AIR CONDITIONING SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Air Conditioner.
Select the setting by referring to the table below.
| Display | Default | Content | Setting |
| Set Temperature Shift | Normal | Function to control the shifted temperature in relation to the displayed temperature | +2 C/+1 C/Normal/-1 C/-2 C |
| Compressor Mode | Automatic | Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF | Manual/Automatic |
| Foot/DEF Auto Mode | ON | Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON | ON/OFF |
| Foot/DEF Automatic Blow Up Function | ON | Function to change the blower level automatically when the defroster is ON | ON/OFF |
| Ambient Temperature Shift | Normal | Function to control the shifted ambient temperature in relation to the displayed ambient temperature | +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C |