Components
| Functions
|
4HI indicator light
| Indicates that the transfer mode is 4WD HIGH (H4).
|
4LO indicator light
| Indicates that the transfer mode is 4WD LOW (L4).
|
CENTER DIFF. indicator light
| Indicates that the center differential is in LOCK mode
|
Warning buzzer
| Sounds an alarm if a violation of the conditions required for mode shifting occurs when the transfer mode is shifted.
|
Center differential lock switch
| Selects the center differential mode between LOCK and FREE.
|
4WD control switch
| Controls the transfer assembly and A.D.D. actuator to select transfer mode among H2, H4, and L4.
|
Multi mode limit switch
| Detects when the transfer mode is H2, 4L or 4F.
|
High-low limit switch
| Detects when the transfer mode is H4 or L4.
|
Center differential lock position detection switch
| Detects when the center differential is in LOCK mode (transfer mode either H4L or L4L).
|
Actuator temperature sensor
| Detects the temperature inside the transfer shift actuator.
|
Transfer shift actuator
| Shifts the transfer mode between 2WD and 4WD, the center differential between LOCK and FREE, and the gear reduction mechanism between HIGH and LOW.
|
A.D.D. actuator
| Shifts the front differential between FREE and LOCK.
|
A.D.D. detection switch
| Detects when the front differential is in LOCK mode.
|
4WD control computer
| Controls the shift actuator, A.D.D. motor, and indicator lamp based on signals from each switch.
|