Malfunction Item
| Fail-Safe Operation
| Indicator Light
| Fail-Safe Deactivation Condition
|
4WD control ECU malfunction
| - 2WD to 4WD HIGH switching is not possible
- 4WD HIGH to 4WD LOW switching is not possible
- Changing center differential from free to lock and lock to free is not possible
| 4HI indicator light, 4LO indicator light and CENTER DIFF. Indicator light blink at 0.2 seconds intervals
| Ignition switch off
|
Wheel speed signal malfunction
| - 2WD to 4WD HIGH switching is not possible
- 4WD HIGH to 4WD LOW switching is not possible
- Changing center differential from free to lock is not possible
| 4HI indicator light blinks at 0.2 seconds intervals. The 4LO and CENTER DIFF. indicator lights may also blink at 0.2 seconds intervals
| - When signal returns to normal
- When the 4WD control switch and transfer shift actuator positions are the same
- Ignition switch off
|
A/T shift position signal malfunction
| 4WD HIGH to 4WD LOW switching is not possible
| 4LO indicator light blinks at 0.2 seconds intervals
| - When signal returns to normal
- When the 4WD control switch and transfer shift actuator positions are the same
- Ignition switch off
|
Engine speed signal malfunction
| 4WD HIGH to 4WD LOW switching is not possible
|
A.D.D. actuator limit switch malfunction
| - 2WD to 4WD HIGH switching is not possible
- 4WD HIGH to 4WD LOW switching is not possible
- During cruise control AUTO driving, cruise control system is turned OFF
- Changing center differential from free to lock and lock to free is not possible
| 4HI indicator light blinks at 0.2 seconds intervals
| Ignition switch off
|
Multi mode transfer shift actuator limit switch malfunction
| - 2WD to 4WD HIGH switching is not possible
- 4WD HIGH to 4WD LOW switching is not possible
- During cruise control AUTO driving, cruise control system is turned OFF
- Changing center differential from free to lock and lock to free is not possible
| CENTER DIFF. indicator light blinks at 0.2 seconds intervals
|
High-low transfer shift actuator limit switch malfunction
| - 2WD to 4WD HIGH switching is not possible
- 4WD HIGH to 4WD LOW switching is not possible
- Changing center differential from free to lock and lock to free is not possible
| 4LO indicator light blinks at 0.2 seconds intervals
|